LYSOL®

LYSOL® POWER & FREE™ Multi-Purpose Cleaner - Pourable - Citrus Sparkle Zest

View instructions for finding the code date

LYSOL POWER  FREE MultiPurpose Cleaner  Pourable  Citrus Sparkle Zest
10000441
Multi-Purpose Cleaners
This Ingredients tab shows the ingredients in this product grouped into the following categories: Active Ingredients, Intentionally Added, Fragrance Components and Non-Functional Constituents. Ingredients that appear on a Designated List are indicated by the blue symbol. Fragrance allergens included on Annex II of the EU Cosmetics Regulation No. 1223/2009 are indicated by the green symbol. Click here for more information on the Designated Lists.
Diluent: Adjusts the concentration of ingredients in a product to deliver target benefits.
Ingredient descriptions are provided by LYSOL®.
CAS #: 7732-18-5
Solvent: Solubilizes or dissolves at least one other substance to form a solution.
Ingredient descriptions are provided by LYSOL®.
CAS #: 29911-28-2
Bleaching Agent: Makes the appearance of substances white or colorless.
Ingredient descriptions are provided by LYSOL®.
CAS #: 7722-84-1
Complexing/Sequestering Agent: Binds hard water and other minerals to allow the cleaning actives to perform more effectively.
Ingredient descriptions are provided by LYSOL®.
CAS #: 77-92-9
Surfactant: Surface-active agent helps remove dirt, stains, and bad smells.
Ingredient descriptions are provided by LYSOL®.
CAS #: 149458-07-1
Surfactant: Surface-active agent helps remove dirt, stains, and bad smells.
Ingredient descriptions are provided by LYSOL®.
CAS #: 160875-66-1
Fragrance: Changes the odor of a product to impart a pleasant odor or impart a pleasant fragrance in the air during or after product use.
Ingredient descriptions are provided by LYSOL®.
CAS #: Fragrance
Complexing/Sequestering Agent: Binds hard water and other minerals to allow the cleaning actives to perform more effectively.
Ingredient descriptions are provided by LYSOL®.
CAS #: 144538-83-0
Surfactant: Surface-active agent helps remove dirt, stains, and bad smells.
Ingredient descriptions are provided by LYSOL®.
CAS #: 68515-73-1
Surfactant: Surface-active agent helps remove dirt, stains, and bad smells.
Ingredient descriptions are provided by LYSOL®.
CAS #: 110615-47-9
Fragrance Component: A component of a fragrance oil.
Ingredient descriptions are provided by LYSOL®.
CAS #: 101-86-0

This ingredient appears on one or more Designated Lists

EU Fragrance Allergens: Chemicals identified as fragrance allergens in Annex III of the EU Cosmetics Regulation 1223/2009, as required to be labeled by the European Detergents Regulation No. 648/2004.  more info…

Fragrance Component: A component of a fragrance oil.
Ingredient descriptions are provided by LYSOL®.
CAS #: 80-54-6

This ingredient appears on one or more Designated Lists

EU CMRs: Chemicals classified by the European Union as carcinogens, mutagens, or reproductive toxicants pursuant to Category 1A or 1B in Annex VI to Regulation (EC) 1272/2008.  more info…

Fragrance Component: A component of a fragrance oil.
Ingredient descriptions are provided by LYSOL®.
CAS #: 25265-71-8
Fragrance Component: A component of a fragrance oil.
Ingredient descriptions are provided by LYSOL®.
CAS #: 78-70-6

This ingredient appears on one or more Designated Lists

EU Fragrance Allergens: Chemicals identified as fragrance allergens in Annex III of the EU Cosmetics Regulation 1223/2009, as required to be labeled by the European Detergents Regulation No. 648/2004.  more info…

Non-Functional Constituent: Non-Functional Constituent
Ingredient descriptions are provided by LYSOL®.
CAS #: 7757-82-6

This ingredient appears on one or more Designated Lists

CA Non-Cancer Hazards: Chemicals that are identified with noncancer endpoints and listed with an inhalation or oral reference exposure level by the Office of Environmental Health Hazard Assessment pursuant to paragraph (2) of subdivision (b) of Section 44360.  more info…

Non-Functional Constituent: Non-Functional Constituent
Ingredient descriptions are provided by LYSOL®.
CAS #: 57-55-6

This ingredient appears on one or more Designated Lists

NY DOH MCLs: Chemicals for which Maximum Contaminant Levels have been established and adopted in Tables 1, 3, 3A, and 7 of Subpart 5-1.52 of Title 10 of the New York Code of the Rules and Regulations (10 NYCRR Subpart 5-1.52).  more info…

The list above contains the product ingredients listed in descending weight percent within each category. The ingredient names use the INCI (or equivalent) nomenclature system. Click here for more information on the nomenclature system.

Human Health

KEEP OUT OF REACH OF CHILDREN PRECAUTIONARY STATEMENTS: Hazards to Humans and Domestic Animals CAUTION: Causes moderate eye irritation. Avoid contact with eyes, skin or clothing. Wash thoroughly with soap and water after handling and before eating, drinking, chewing gum or using tobacco. If you have sensitive skin wear rubber gloves.
FIRST AID If in eyes • Hold eye open and rinse slowly and gently with water for 15-20 minutes. • Remove contact lenses, if present, after the first 5 minutes, then continue rinsing eye. • Call a Poison Control Center or doctor for treatment advice. If on skin • Take off contaminated clothing. • Rinse skin immediately with plenty of water for 15-20 minutes. • Call a Poison Control Center or doctor for treatment advice. CONTACT NUMBER Questions? Comments or In case of an emergency, call toll free 1-800-228-4722. Have the product container or label with you when calling a Poison Control Center, or doctor, or going for treatment.

Usage Instructions

KITCHEN • Floors • Appliance Exteriors • Washable Walls • Countertops BATHROOM • Toilet Bowl Exteriors • Bathtubs • Showers • Diaper Pails • Door Knobs DIRECTIONS FOR USE: It is a violation of Federal law to use this product in a manner inconsistent with its labeling. To Clean / Deodorize: Use full strength or dilute 1/4 cup (2 oz.) per gallon of warm water. Apply to surface with cloth, sponge, mop or trigger spray until thoroughly wet. Wipe with a clean cloth, sponge, or mop. When using full strength, rinse thoroughly with clean water. To Clean Soap Scum and Greasy Soil: Use at full strength and rinse. To Sanitize / Disinfect: Pre-clean surface. Use full strength or dilute 1 oz. with 5 oz. of warm water. Apply to surface with cloth, mop or trigger spray until thoroughly wet. To Sanitize: Leave for 60 seconds before wiping. To Disinfect: Leave for 6 minutes before wiping. Rinse all food contact surfaces with water after use. To Control Mold & Mildew: Apply to pre-cleaned surface. Let surface remain wet for 3 minutes and then allow to air dry. Repeat application at weekly intervals or when mold and mildew growth appears. Do not use on eating / cooking utensils, glasses / dishes or cookware, unfinished, oiled or waxed wood floors. On painted surfaces test a small inconspicuous area first. Rinse bathtub / shower surfaces with water after using product. STORAGE AND DISPOSAL: Store in areas inaccessible to children. Keep securely closed. Non-refillable container. Do not reuse or refill this container. Discard in trash or offer for recycling, if available.
Claims listed within SmartLabel™ are either governed by entities such as the USDA, FDA, EPA, etc. or defined by participating brands.

Item Benefits / Features

20% MORE Compared to 40 fl. oz. size KILLS GERMS** EVEN WHEN DILUTED MAKES 24 GALLONS OF CLEANING POWER • Cuts Tough Grease and Grime **Kills escherichia coli 0157:H7, Listeria monocytogenes, Salmonella enterica, Staphylococcus aureus, Streptococcus pyogenes, Rotavirus WA, and Respiratory Syncytial Virus on hard, non-porous surfaces in 6 minutes. Kills 99.9% of Enterobacter aerogenes and Staphylococcus aureus on hard, non-porous surfaces in 60 seconds. Contains no phosphates. This bottle is made of 25% post-consumer recycled plastic.