LYSOL®

LYSOL® Max Cover Shower Foamer (Discontinued Dec. 2022)

View instructions for finding the code date

LYSOL Max Cover Shower Foamer Discontinued Dec 2022
10000441
Bathroom Cleaners
This Ingredients tab shows the ingredients in this product grouped into the following categories: Active Ingredients, Intentionally Added, Fragrance Components and Non-Functional Constituents. Ingredients that appear on a Designated List are indicated by the blue symbol. Fragrance allergens included on Annex II of the EU Cosmetics Regulation No. 1223/2009 are indicated by the green symbol. Click here for more information on the Designated Lists.
Antimicrobial Active: The active in surface disinfectants and sanitizers to kill germs on surfaces.
Ingredient descriptions are provided by LYSOL®.
CAS #: 32426-11-2

This ingredient appears on one or more Designated Lists

CA Priority Chemicals: Chemicals identified as priority chemicals by the California Environmental Contaminant Biomonitoring Program pursuant to Section 105449.  more info…

Antimicrobial Active: The active in surface disinfectants and sanitizers to kill germs on surfaces.
Ingredient descriptions are provided by LYSOL®.
CAS #: 7173-51-5

This ingredient appears on one or more Designated Lists

CA Priority Chemicals: Chemicals identified as priority chemicals by the California Environmental Contaminant Biomonitoring Program pursuant to Section 105449.  more info…
AOEC Asthmagens: Chemicals designated as asthmagens by the Association of Occupational and Environmental Clinics.  more info…

Antimicrobial Active: The active in surface disinfectants and sanitizers to kill germs on surfaces.
Ingredient descriptions are provided by LYSOL®.
CAS #: 5538-94-3

This ingredient appears on one or more Designated Lists

CA Priority Chemicals: Chemicals identified as priority chemicals by the California Environmental Contaminant Biomonitoring Program pursuant to Section 105449.  more info…

Diluent: Adjusts the concentration of ingredients in a product to deliver target benefits.
Ingredient descriptions are provided by LYSOL®.
CAS #: 7732-18-5
Propellant: Disperses the product from an aerosol can.
Ingredient descriptions are provided by LYSOL®.
CAS #: 75-28-5
Chelating Agent: Binds hard water and other minerals to allow the cleaning actives to perform more effectively.
Ingredient descriptions are provided by LYSOL®.
CAS #: 64-02-8
Solvent: Solubilizes or dissolves at least one other substance to form a solution.
Ingredient descriptions are provided by LYSOL®.
CAS #: 112-34-5

This ingredient appears on one or more Designated Lists

CA TACs : Chemicals identified as toxic air contaminants under Section 93000 or 93001 of Title 17 of the California Code of Regulations.  more info…

Surfactant: Surface-active agent helps remove dirt, stains, and bad smells.
Ingredient descriptions are provided by LYSOL®.
CAS #: 34398-01-1
Fragrance: Changes the odor of a product to impart a pleasant odor or impart a pleasant fragrance in the air during or after product use.
Ingredient descriptions are provided by LYSOL®.
CAS #: Fragrance
Corrosion Inhibitor: Helps maintain fresh product contents from corrosion or deterioration.
Ingredient descriptions are provided by LYSOL®.
CAS #: 7631-95-0
Surfactant: Surface-active agent helps remove dirt, stains, and bad smells.
Ingredient descriptions are provided by LYSOL®.
CAS #: 137-16-6
pH Adjuster: Controls the pH level of a product to ensure stability and maximize performance.
Ingredient descriptions are provided by LYSOL®.
CAS #: 1336-21-6

This ingredient appears on one or more Designated Lists

CA Non-Cancer Hazards: Chemicals that are identified with noncancer endpoints and listed with an inhalation or oral reference exposure level by the Office of Environmental Health Hazard Assessment pursuant to paragraph (2) of subdivision (b) of Section 44360.  more info…
AOEC Asthmagens: Chemicals designated as asthmagens by the Association of Occupational and Environmental Clinics.  more info…

Fragrance Component: A component of a fragrance oil.
Ingredient descriptions are provided by LYSOL®.
CAS #: 80-54-6

This ingredient appears on one or more Designated Lists

EU CMRs: Chemicals classified by the European Union as carcinogens, mutagens, or reproductive toxicants pursuant to Category 1A or 1B in Annex VI to Regulation (EC) 1272/2008.  more info…

Fragrance Component: A component of a fragrance oil.
Ingredient descriptions are provided by LYSOL®.
CAS #: 25265-71-8
Fragrance Component: A component of a fragrance oil.
Ingredient descriptions are provided by LYSOL®.
CAS #: 97-53-0

This ingredient appears on one or more Designated Lists

AOEC Asthmagens: Chemicals designated as asthmagens by the Association of Occupational and Environmental Clinics.  more info…

Fragrance Component: A component of a fragrance oil.
Ingredient descriptions are provided by LYSOL®.
CAS #: 125-12-2
Fragrance Component: A component of a fragrance oil.
Ingredient descriptions are provided by LYSOL®.
CAS #: 97-54-1

This ingredient appears on one or more Designated Lists

IARC Carcinogens : Group 1, 2A, or 2B carcinogens identified by the International Agency for Research on Cancer.  more info…

Non-Functional Constituent: Non-Functional Constituent
Ingredient descriptions are provided by LYSOL®.
CAS #: 1310-73-2

This ingredient appears on one or more Designated Lists

CA Non-Cancer Hazards: Chemicals that are identified with noncancer endpoints and listed with an inhalation or oral reference exposure level by the Office of Environmental Health Hazard Assessment pursuant to paragraph (2) of subdivision (b) of Section 44360.  more info…

Non-Functional Constituent: Non-Functional Constituent
Ingredient descriptions are provided by LYSOL®.
CAS #: 5064-31-3

This ingredient appears on one or more Designated Lists

IARC Carcinogens : Group 1, 2A, or 2B carcinogens identified by the International Agency for Research on Cancer.  more info…

Non-Functional Constituent: Non-Functional Constituent
Ingredient descriptions are provided by LYSOL®.
CAS #: 74-98-6

This ingredient appears on one or more Designated Lists

EU CMRs: Chemicals classified by the European Union as carcinogens, mutagens, or reproductive toxicants pursuant to Category 1A or 1B in Annex VI to Regulation (EC) 1272/2008.  more info…

Non-Functional Constituent: Non-Functional Constituent
Ingredient descriptions are provided by LYSOL®.
CAS #: 64-17-5

This ingredient appears on one or more Designated Lists

US NTP Carcinogens: Reproductive or developmental toxicants identified in Monographs on the Potential Human Reproductive and Developmental Effects published by the federal National Toxicology Program, Office of Health Assessment and Translation  more info…

The list above contains the product ingredients listed in descending weight percent within each category. The ingredient names use the INCI (or equivalent) nomenclature system. Click here for more information on the nomenclature system.

Human Health

KEEP OUT OF REACH OF CHILDREN

PRECAUTIONARY STATEMENTS: Hazards to Humans and Domestic Animals

CAUTION: Causes moderate eye irritation. Avoid contact with eyes, skin or clothing. Wash thoroughly with soap and water after handling and before eating, drinking, chewing gum, or using tobacco.

PHYSICAL AND CHEMICAL HAZARDS: Contents under pressure. Do not use or store near heat or open flame. Do not puncture or incinerate container. Exposure to temperature above 120ºF or in sun or discarding can in fire or incinerator may cause bursting.

FIRST AID:

If in eyes: • Hold eye open and rinse slowly and gently with water for 15-20 minutes. • Remove contact lenses, if present, after the first 5 minutes, then continue rinsing eye. • Call a Poison Control Center or doctor for treatment advice.

If on skin or clothing: • Take off contaminated clothing. • Rinse skin immediately with plenty of water for 15-20 minutes. • Call a Poison Control Center or doctor for treatment advice.

CONTACT NUMBER: Questions? Comments or In case of an emergency, call toll free 1-800-228-4722. Have the product container or label with you when calling a Poison Control Center, or doctor, or going for treatment.

Storage and Disposal

STORAGE AND DISPOSAL: Store in a cool dry area. Non-refillable container. Do not reuse empty container. Recycle empty container if available or discard in trash.

Environment

  • Contains no phosphates.
  • Encourage your local authorities to establish a program to recycle this can.
  • This can is made from an average of 25% recycled steel (10% post-consumer).

Usage Instructions

Shower - Tubs - Shower Doors - Tubs and Glazed Ceramic Tile - Vanity Tops, Sinks & Chrome Fixtures

DIRECTIONS FOR USE: It is a violation of Federal law to use this product in a manner inconsistent with its labeling. 

Hold can upright 6-8 inches from surface and spray for 2 seconds. Do not tilt more than 45°.

To Clean: Apply to surface. Allow product to penetrate tough soap scum, water marks or limescale soils for a few minutes. Wipe. Repeat if necessary.

To Sanitize/Disinfect: Preclean. Apply and leave wet for 30 seconds to sanitize and 10 minutes to disinfect. Wipe dry.

To Control the Growth of Mold & Mildew: Preclean. Apply and leave wet for 3 minutes and allow to air dry. Repeat weekly or as needed.

Rinse food contact surfaces with potable water.

Does not harm most bathroom surfaces. Rinse bathtub/shower surfaces with water after using product. For other surfaces, spot test in an inconspicuous area.

Claims listed within SmartLabel™ are either governed by entities such as the USDA, FDA, EPA, etc. or defined by participating brands.

Item Benefits / Features

2x Faster Coverage1

  • Wide Angle Spray
  • Destroys Soap Scum
  • Tough on Mold & Mildew
  • Cleans to a brilliant shine
  • Kills 99.9% of Bacteria & Viruses**
  • Sanitizes bathroom surfaces in 30 seconds**** 

¹vs. Lysol Power Foamer Bathroom Cleaner

**Kills 99.9% of Escherichia coli O157:H7, Rhinovirus Type 39, Staphylococcus aureus, Pseudomonas aeruginosa, Salmonella enterica and Rotavirus WA on hard non-porous surfaces in 10 minutes.

****Kills 99.9% of Enterobacter aerogenes and Staphylococcus aureus on hard, non-porous surfaces in 30 seconds

DISINFECTS the following Organisms on hard, non-porous surfaces

Contact Time

Enveloped Viruses

 

Bovine Viral Diarrhea Virus

5 minutes

Duck Hepatitis B Virus

5 minutes

Feline lnfectious Peritonitis Virus

5 minutes

Herpes Simplex Virus Type 1

5 minutes

Herpes Simplex Virus Type 2

5 minutes

Human Immunodeficiency Virus Type 1 (HIV-1)

5 minutes

Influenza A Virus (Strain Hong Kong)

5 minutes

Influenza A Virus (Strain A/New Caledonia/20/99)

5 minutes

Influenza A Virus (H1N1) (Strain A/Mexico/4108/2009)

5 minutes

Influenza A (H3N2)

5 minutes

Influenza A Virus (H5N1)

5 minutes

Influenza B Virus (Strain B/Hong Kong/5/72)

5 minutes

Respiratory Syncytial Virus (RSV)

5 minutes

SARS Associated Coronavirus

5 minutes

Non-Enveloped Viruses

 

Adenovirus Type 2

10 minutes

Canine Parvovirus

10 minutes

Coxsackie Type B3 Virus

10 minutes

Echovirus Type 12

10 minutes

Feline Calicivirus (Norovirus)

10 minutes

Feline Panleukopenia Virus

10 minutes

Feline Picornavirus

10 minutes

Hepatitis A Virus

10 minutes

Poliovirus Type 1

10 minutes

Porcine Parvovirus

10 minutes

Rhinovirus Type 39

10 minutes

Rotavirus WA

10 minutes

Gram-Negative Bacteria

 

Acinetobacter baumannii – Multi-Drug Resistant (MDR)

10 minutes

Bordetella pertussis

10 minutes

Enterobacter aerogenes - Multi-Drug Resistant (MDR)

10 minutes

Escherichia coli O157:H7

10 minutes

Escherichia coli with Extended- Spectrum beta-lactamase (ESBL)

10 minutes

Klebsiella pneumoniae with New Delhi metallobeta- lactamase 1 (NDM-1)

10 minutes

Pseudomonas aeruginosa

5 minutes

Salmonella enterica

5 minutes

Gram-Positive Bacteria

 

Enterococcus faecalis

10 minutes

Enterococcus faecium - Multi-Drug Resistant (MDR)

10 minutes

Listeria monocytogenes

10 minutes

Staphylococcus aureus

10 minutes

Staphylococcus aureus - Community Associated Methicillin Resistant (CA-MRSA USA-300)

10 minutes

Staphylococcus aureus - Methicillin resistant (MRSA)

10 minutes

Staphylococcus aureus - Vancomycin Resistant (VRSA)

10 minutes

Streptococcus pyogenes (Strep)

10 minutes

Fungi

 

Candida albicans

10 minutes

SANITIZES the following Organisms on hard, non-porous surfaces

Contact Time

Gram-Negative Bacteria

 

Enterobacter aerogenes

10 seconds

Escherichia coli

10 seconds

Escherichia coli O157:H7

30 seconds

Gram-Positive Bacteria

 

Enterococcus faecalis - Vancomycin Resistant Enterococcus (VRE)

30 seconds

Staphylococcus aureus

10 seconds

Staphylococcus aureus - Methicillin Resistant (MRSA)

30 seconds

CONTROLS the growth of Mold and Mildew on hard, non-porous surfaces

Contact Time

Fungi

 

Aspergillus niger (mold & mildew)

3 minutes